| |
|
|
The Akamina Wave Probe Head is designed to work with the AWP-24 Wave
Height Gauge. The probe head is the part of the device that is partially
submerged in water to measure wave heights or water levels.
|
Akamina Wave Probe Head
|
|
Some of the key features of the AWP Wave Probe Head are:
- no electrical interference with other probes or instrumentation
- available in standard lengths of 30 cm and 60 cm
- non-standard lengths from a few centimetres to metres are available
upon request
- a variety of different probe heads with different lengths can
be used with the same AWP-24 electronics
- custom designed, easy to use clamp for connecting the probe
to the wave probe stand
- support rod and clamp manufactured from stainless steel
- the probe head can be attached to a fixed structure or to a
moveable structure such as a tripod. The mounting clamp is provided
to facilitate mounting. The probe head itself is connected to
the BNC connector on the AWP-24 enclosure using the coaxial cable.
|
Download
our brochure and specifications for the AWP-24 (pdf).
Example Setup on Tripod
(enlarge)
|
|
Setup, configuration and calibration:
- easily configured using only a digital volt meter or a data
acquisition system
- less frequent calibrations required due to temperature stable
electronics and probe head
|
Additional information on the AWP-24 is available:
For more information on Akamina's Wave Probe Head contact us at:
.
|
|
|
IMPORTANT NEWS
Do you want to spend less time calibrating
and more time measuring? Akamina Technologies is now
offering the only wave height gauge on the market that thanks to
its unique digital technology and innovation does not require frequent
calibrations.
Customers who have chosen Akamina's Wave
Height Gauge include: NRC-CHC, NRC-IOT, KAIST, Johns Hopkins University,
...
For other news visit Akamina Technologies
News.
|
|
|
