Capacitance Wave Height Gauge

The AWP-24 is ideally suited for indoor and outdoor applications where high accuracy water level measurement is required. It provides an accurate, highly responsive measure of depth changes from sub-millimeter to meters. It comes in a rugged diecast aluminum alloy enclosure that allows it to be deployed indoors or outdoors. The device is easily configured using only a digital volt meter or a data acquisition system.

The output stage of the AWP-24 includes a 16-bit digital-to-analogue converter. This provides a high-level +/- 5 volt analogue output signal that can be sampled using conventional data acquisition systems. Future versions of the device will be available with digital interfaces that will allow direct interface to a computer.

AWP-24 Wave Height Gauge

Some of the key features of the AWP-24 are:

• Simple to set up, configure and calibrate
• No electrical interference with other probes or instrumentation
• Measures capacitance digitally with no energy discharge into the water
• Highly linear (0.2% over the measurement range)
• Fast response time (the output is updated every 5 ms)
• Low power consumption (draws only 21 mA of current at 10 volts)
• Firmware and functionality is upgradeable
• Filtered analogue signal output for data capture

Additional information on the AWP-24 is available:

• Product Brochure
• Set Up Demo: our new interactive AWP-24 set up demo
• User's Guide
• Application Note: on obtaining minimum noise data

For more information on Akamina's Wave Height Gauge contact us at: .

Example Set up on Tripod

REQUEST A QUOTE:

Home | Products | Services| About Us | Contact Us | Sitemap